Activity
From 01/07/2012 to 02/05/2012
02/04/2012
- 09:54 am Bug #1390 (New): metering app: wrong scaling in energy graphs
- 1.3.0-test14
metering: 0.2.5-r1
The energy graphs are always scaled 0-20 Wh even when the displayed values exceed...
02/03/2012
- 03:02 pm Feature #1389 (New): provide blink and set outval functionality on zones
- To make sure that any called action on zones from the scene-responder are properly forwarded, the appropriate calls i...
- 03:01 pm Bug #1388 (New): Swap license agreement text for dSApps
- We need to adapt our license agreement for dSApps. The new text file is attached
- 02:47 pm Bug #1135 (Resolved): SceneResponder calls wrong group number
- In zones, actions on scenes are now called directly rather than over the "optimizer".
There might be the same issu... - 01:44 pm Bug #1365 (Resolved): 'Taster Modus' is showing wrong scene number for area buttons
- MR merged
- 11:44 am Bug #1387 (New): change feedback.aizo.com URL to update.aizo.com in opkg add-ons feed configuration
- The add-ons config is still listing the old URL. Currently both addresses map to the same server so it does not matte...
- 08:33 am Bug #1368 (Resolved): power-metering 1-second series very spike prone
- MR merged
- 08:01 am Bug #1386 (New): RTC synchronization must be done more frequently
- in order to prevent from wrong or missing timed-events after a complete dSS restart, the RTC must be synchronized mor...
- 07:53 am Bug #1385 (New): Changes for blade calibration wizard
- Following topics need to be changed within blade calibration wizard:
Saving the value when completing the dialog:
... - 07:44 am Bug #1372: dS-configurator does not run on IE
- IE8 is still more common than IE9, so we must verify IE8 and 9.
IE 7 and 6 are NOT relevant and must not be tested.... - 07:33 am Bug #1384 (New): Scene transition time must not be shown for grey KL
- Within Activities / Device Properties Dialog, the scene transition time (Übergangszeit zum Aufruf) must not be shown ...
02/02/2012
- 01:53 pm Bug #1372: dS-configurator does not run on IE
- Which versions of IE have to be supported?
- 01:52 pm Feature #1361: Configuration of Apartment-push button
- Actually, apartment buttons (id 14) are handled by the dSM and act on the whole apartment. Server-buttons (id 15) are...
- 12:44 pm Feature #1383 (New): App-Framework -> "Eintrag kopieren"
- Aus dS-Apps-Guildlines: für die Listenansichten soll ein Button eingefügt werden, mit dem ein Eintrag kopiert werden ...
- 12:44 pm Feature #1382 (New): App-Framework -> Enable Einträge
- Aus dS-Apps-Guildlines: Jeder Eintrag in den Listen muss per Checkbox ein und abschaltbar sein
- 12:44 pm Feature #1381 (New): App-Framework -> Format der Einträge in Liste
- Aus dS-Apps-Guildlines: für Auszulösende Handlungen etc. gibt es in den App-Guidelines vorgaben.
- 12:44 pm Feature #1380 (New): App-Framework -> Tabs in Editor
- Aus dS-Apps-Guildlines: Im Editor kann es ebenfalls Tabs geben, entsprechend muss das Framework vorbereitet werden
- 12:44 pm Feature #1379 (New): App-Framework -> Darstellungen für Zeitwiederholungen
- Aus dS-Apps-Guildlines: Die Zeitcontrols im Editor der Timed Event sollen ebenfalls tooglebuttons werden und als Erlä...
- 12:44 pm Feature #1378 (New): App-Framework -> Erweiterung der Zeiten im Timed Events
- Aus dS-Apps-Guildlines: Es gibt Erweiterungen, welche Zeitevents als Basis dienen. Diese muss mit aufgenommen werden
- 12:44 pm Feature #1377 (New): App-Framework -> Erweiterung der Zeiten im Present Simulator
- Aus dS-Apps-Guildlines: Es gibt Erweiterungen, welche Zeitevents als Basis dienen. Diese muss mit aufgenommen werden
- 12:44 pm Feature #1376 (New): App-Framework -> Auslösende Aktivität
- Aus dS-Apps-Guildlines: Die Auswahl einer Auslösenden Aktivität soll per "Finder"-Schema geschehen. Entsprechend muss...
- 12:44 pm Feature #1375 (New): App-Framework -> Auszuführende Handlungen
- Aus dS-Apps-Guildlines: Die Auswahl einer Auszuführende Aktivität soll per "Finder"-Schema geschehen. Entsprechend mu...
- 12:44 pm Feature #1374 (New): App-Framework -> Bedingte Ausführung
- Aus dS-Apps-Guildlines: Bedingte Ausführungen sollen in verschiedenen Apps verwendet werden
- 09:03 am Bug #1373 (New): Restoring a backup cannot be done on IE and Chrome
- When trying to restore a backup, the file is shown as 'C:\fakepath\dss_backup_2012-01-30_155341.dss' and marked as in...
- 09:00 am Bug #1372 (New): dS-configurator does not run on IE
- Using dSS v1.3, the web-configurator does no longer run on IE.
The 'Loading...' is shown only. - 08:43 am Bug #1371 (New): Rename scripting scene constants
- http://redmine.digitalstrom.org/projects/dss/wiki/Scripting_inside_the_dSS:
Remove the misleading 'user' scene nam... - 08:26 am Bug #1370 (New): Saving output mode for blade calibration is wrong
- within shade property dialog:
when closing the dialog using the save button, the output mode is to calibrated as soo...
02/01/2012
- 08:50 pm Bug #1143: Server set to Fix IP changes its IP address
- so far tests show that the dhcp client is not being stopped.
investigation in progress - 04:53 pm Bug #1323: No error when refreshing package info if server is not available
- Merge request submitted.
- 01:05 pm Bug #1365: 'Taster Modus' is showing wrong scene number for area buttons
- MR submitted
- 01:04 pm Bug #1368: power-metering 1-second series very spike prone
- MR submitted
- 09:56 am Bug #1135: SceneResponder calls wrong group number
- corresponding scene-responder log file looks correct:...
- 09:13 am Bug #1368 (Assigned): power-metering 1-second series very spike prone
- 08:48 am Bug #1345 (Resolved): "refresh view" results in tripple-refresh
- MR merged
- 08:44 am Bug #1343 (Resolved): backup restore throws an error because of ntpclient configuration
- MR merged
01/31/2012
- 08:54 pm Bug #1369 (New): "stimmunten einstellen" checkbox text is misaligned
- dSS11 WebSetup -> Advanced View -> System -> scroll down to "Stimmungen Einstellen"
Text "Stimmungen einstellen üb... - 04:56 pm Bug #1368 (Resolved): power-metering 1-second series very spike prone
- Due to timing jitter, the power values derived from the energy counter contain 0%/200% spikes.
Re-introduce storin... - 03:42 pm Bug #1367 (New): Correct solar_computer.js path in subscription.xml
- Move such common scripts into folder data/scripts.
- 01:41 pm Bug #1345: "refresh view" results in tripple-refresh
- MR submitted
- 01:33 pm Bug #1356 (Resolved): Communication logs may list old dSID's
- 01:32 pm Bug #1327 (Resolved): Wrong apartmentID selected
- 01:32 pm Feature #1214 (Resolved): Add device presence check on device level
- 08:38 am Bug #1343: backup restore throws an error because of ntpclient configuration
- MR submitted
01/30/2012
- 10:16 pm Feature #1058 (Resolved): App overview: the app names must be independant from the package name
- Merged into mainline. Will appear in dSS11 WebSetup release 0.21.0
- 06:54 pm Bug #1366 (New): Inconvenient/incorrect date format in dsa log files
- The log files in /var/log/dsa contain timestamps at the beginning of each line.
The date portion of the timestamp is... - 06:03 pm Tasks #1344 (Closed): UI
- 06:02 pm Tasks #1352 (Closed): dSA task handler
- 05:20 pm Bug #1349 (Resolved): Selection for all rooms is missing in timed-events and scene-responder app
- the problem was that the isPresent flag for zone 0 is not set to 'true' anymore from the dss side. this flag is now i...
- 05:17 pm Feature #1362: Modify MyEnersave / Eragy App to match new interface
- Mail from Enersave:
New Art work is attached.
All Urls for myenersave.com are forwarded to bidgely.com.
No d... - 05:13 pm Bug #1302 (Resolved): Scene Responder: application hangs while loading configuration website
- 03:03 pm Bug #1364 (Resolved): Local priority mode cannot be changed for area buttons
- MR merged
- 02:41 pm Feature #1324 (Resolved): UI modifications to support Jalousie devices (edit device value dialog)
- Merged into mainline. Will appear in dSS websrc release 1.4.0
- 01:54 pm Feature #1362 (Assigned): Modify MyEnersave / Eragy App to match new interface
- 01:50 pm Bug #1365 (Assigned): 'Taster Modus' is showing wrong scene number for area buttons
- 01:42 pm Bug #1326 (Resolved): IPhone-App and dS-Taster : Apps are not able to discover dSS
- 01:31 pm Feature #1058: App overview: the app names must be independant from the package name
- Development feed updated. add-ons testing feed updated.
- 01:30 pm Bug #1365 (Resolved): 'Taster Modus' is showing wrong scene number for area buttons
- The 'Taster Modus' column on the UI indicates the wrong scene numbers if an area button is defined.
If area 1 is sel... - 12:04 pm Feature #1362: Modify MyEnersave / Eragy App to match new interface
- Obviously, myenersave changed its name to 'bidgely'. I'll need to check with marketing whether the logo and App-text ...
- 11:47 am Bug #1364: Local priority mode cannot be changed for area buttons
- MR submitted
- 11:46 am Bug #1364 (Assigned): Local priority mode cannot be changed for area buttons
- 11:35 am Bug #1364 (Resolved): Local priority mode cannot be changed for area buttons
- When setting a button to area-mode, it should be possible to set or remove the local-priority mode (Lokalpriorisierun...
- 11:24 am Feature #1246 (Closed): Integrate new grey and black devices in 'Schulungskoffer' script
- 11:23 am Feature #1048 (Closed): Timeout for stop handling must be adapted according to maximum device tim...
- Hallo Cornel
Hab den Test (ändern des stop timeouts) gemacht und es hat alles wie erwartet funktioniert!
Grüsse,
R... - 07:53 am Feature #1363 (New): Modify LED settings on dSM
- the dSM LED should change its behavior as follows:
- turn yellow as long as jumble period is active
- blink blue-ye... - 02:25 am Feature #1058: App overview: the app names must be independant from the package name
- Patched opkg to fix "tags" field handling.
Added new option to opkg2json to list tags, released new opkg2json vers...
01/28/2012
01/27/2012
- 06:07 pm Feature #1324: UI modifications to support Jalousie devices (edit device value dialog)
- Merge request submitted.
- 04:55 pm Feature #1362 (Assigned): Modify MyEnersave / Eragy App to match new interface
- As the metering interface was modified, the Apps must be updated accordingly
- 03:17 pm Feature #1322 (Resolved): UI modifications to support Jalousie devices (shade property dialog)
- 03:16 pm Feature #1322: UI modifications to support Jalousie devices (shade property dialog)
- Merged into mainline.
- 02:06 pm Bug #1307 (Resolved): Pushbutton mode 'area taster' must disable local priority as a default for ...
- MR merged
- 02:05 pm Tasks #1338 (Closed): UI part
- 08:14 am Feature #1175: Add new machine definition for new dSS hardware
- Michael, please verify as I can't check the dSS internals. Thanks.
- 08:13 am Feature #963 (Closed): Update OE and Linux kernel to latest version
- 08:12 am Feature #1105 (Closed): Energy values must be available in Ws instead of Wh only
- 08:11 am Bug #489 (Closed): on / off switching for programming mode
- 08:10 am Bug #1187 (Closed): Area pushbutton must be able to programm room scenes as well
- 08:08 am Feature #1077 (Closed): Apps: add possibility to set timed events to sunrise-/set
- 08:02 am Feature #1361 (New): Configuration of Apartment-push button
- With black TKM's well have the option to define apartment-push buttons that are handled within the dSS only.
Those b...
01/26/2012
- 05:41 pm Tasks #1341 (Closed): dsm regression test
- 04:49 pm Tasks #1340 (Closed): provide functionality in dsm
- 04:49 pm Tasks #1339 (Closed): new api call for device presence check.
- 04:49 pm Tasks #1337 (Closed): dsm part
- 04:47 pm Feature #1357 (Assigned): Provide the origin dSID of a system level event
- 03:35 pm Bug #1360 (New): Shade value dialog: position value is sent after klicking min/max button
- When entering a position value into the edit field and pressing enter, the position is set (e.g. 70%).
If I then pre... - 02:16 pm Bug #1359: Fehler beim Setzen der Geräte Eigenschaft "Blinken bei Aufruf" per Web-UI
- Die Punkte "Ausgang nicht verändern" und "Erweiterte Einstellungen" fehlen auch.
- 02:05 pm Bug #1359 (New): Fehler beim Setzen der Geräte Eigenschaft "Blinken bei Aufruf" per Web-UI
- Beim Versuch, bei einer GN-TKM 200 (Gehen/Kommen Taster) das Flag zum Blinken bei Aufruf der Aktivität "Klingeln" zu ...
- 02:00 pm Bug #1267 (Closed): List of activities is wrong when selecting pushbutton with scenes >10
- 01:59 pm Feature #1313: Provide events for apartment buttons
- These events and the device local on/off actions should use a new buttonClick event class, rather than re-using the c...
- 01:46 pm Bug #1108 (Closed): Offene Webinterface-Requests stören den dSS beim Neustart
- 01:28 pm Feature #1225: iPhone app: support for multiple klemme colours: grey
- 12:06 pm Bug #1135: SceneResponder calls wrong group number
- this might be fixed if we call the scene on the zone directly?
- 11:30 am Bug #1358 (New): Timed Events - Keine Räume in der Auswahlliste
- Wenn ich versuche, einen neue Timed-Event anzulegen, kann ich im den Action-Dialog keine Raum auswählen; die Combobox...
- 11:06 am Feature #1357 (Assigned): Provide the origin dSID of a system level event
- Provide the origin and context information for callScene and undoScene events:
* dS Device/Button:
add the bus ... - 10:26 am Feature #1312: Provide events for the undo scene function
- needed to handle undo's within Apps
- 10:02 am Bug #1356 (Resolved): Communication logs may list old dSID's
- The dsa device database table may contain multiple devices for the same bus address since, when resolving a short add...
- 10:00 am Bug #1355 (New): IPhone: metering reading Wh
- The meter reading function delivers values in Wh. In my case a value of nearly 49 000 000 Wh is shown for a dSM (livi...
- 09:53 am Feature #1272 (Closed): Rename scene names for shade-scenes
- it's not correct - bug #1354 was created
- 09:52 am Bug #1354 (New): Naming of area-scenes for shades is wrong
- Ticket #1272 requested the renaming of shade scenes as follows:
- Aus >> Zu
- Stimmung 1 >> Auf
- Bereich x aus >>... - 09:41 am Bug #1303: mobile-remote-control: first start-up without showing energy bars
- Der Fehler sollte nun mit der Version mobile-remote app version: V 0.8.45b / 12.01.2012 behoben sein.
- 09:07 am Bug #1135 (Assigned): SceneResponder calls wrong group number
- the phantom is back again:
Jaime set up a scene-responder that switches on the audio device when calling light scene...
01/25/2012
- 04:39 pm Bug #1274 (Closed): Edit device properties dialog in activities hangs when editing devices WITH o...
- 04:37 pm Bug #1293 (Closed): Webui: Change text for disabling programming mode
- 03:29 pm Bug #1336 (Closed): iPhone app: Update hoptoad to latest version (now called Airbrake)
- 12:07 pm Bug #1353 (New): App overview doesn't show apps
- If installing or updating an App and navigating back to the App-overview, the message 'Liste der installierten Apps w...
- 11:27 am Feature #1324: UI modifications to support Jalousie devices (edit device value dialog)
- Additional request:
- when the dialog is opened or changed to a device showing the blade angle (Lamellenöffnung), th... - 10:10 am Feature #1332 (Resolved): Metering: change to new metering intervals
- MR merged
- 10:10 am Feature #1330 (Resolved): Metering: provide interface to query defined time period
- MR merged
- 10:09 am Bug #1318 (Resolved): Internes Metering: EnergieWerte
- MR merged
- 10:09 am Bug #1299 (Resolved): Metering sometimes returns 0 for the last second
- MR merged
- 10:08 am Bug #1290 (Resolved): do not use deprecated headers
- merged
01/24/2012
- 05:09 pm Bug #1289 (Closed): Android app: special characters in password/username can destroy http get
- it was a space char that broke the calls, and it's fixed now.
- 04:21 pm Tasks #1352 (Assigned): dSA task handler
- 04:21 pm Tasks #1352 (Closed): dSA task handler
- 02:51 pm Bug #1351 (New): Android: Should aquire new applicationtoken in case it's not valid
- As it is now, the android application cannot handle the case where the application token have been removed.
In case... - 08:06 am Bug #1343 (Assigned): backup restore throws an error because of ntpclient configuration
01/23/2012
- 05:07 pm dSS11 Web Setup Interface Feature #1139: Umbeschriftung Aktivitäten
- Wie ist hier der Stand, es kann wohl nicht so bleiben?
- 05:06 pm Feature #1159 (Closed): Mehrfach auswahl bei App inst.
- Bleibt so gemäss gespräch zwischen mir und Cornel
- 05:01 pm Bug #1009 (Closed): Einstellen LED Schnurdimmer bei deaktivierten ausgang nicht möglich
- 03:40 pm Feature #1066 (Closed): mehrere Pfade in einem /json/property/query
- 02:39 pm Feature #1054 (Rejected): Allow scene responder to receive events over URL calls
- we'll not allow url calls directly to scene responder.
We'll provide the option to call a custom defined high-level ... - 02:23 pm Bug #1328 (Closed): IPhone-App: negative value meter reading
- As mentioned, already fixed
- 02:21 pm Bug #1350 (Assigned): Additional bus change callbacks of unchanged devices
- 02:17 pm Bug #1349 (Assigned): Selection for all rooms is missing in timed-events and scene-responder app
- 02:14 pm Bug #1348 (Assigned): Scene-responder event might result in an endless loop
- 02:06 pm Feature #1347 (Assigned): Provide civil twilight data
- Miguel, please review civil twilight definition.
- 02:02 pm Bug #1346 (Assigned): dss11-ledd does not respond to event messages
- 01:59 pm Bug #1345 (Assigned): "refresh view" results in tripple-refresh
- 01:53 pm Bug #1342 (Assigned): Event-Mailer: event list does not have a scroll bar
- 01:51 pm Bug #1335 (Assigned): Update git repo of iPhone code
- 01:50 pm Bug #1334 (Assigned): iPhone App: Status bar wrongly changes to green
- 01:49 pm Bug #1328 (Assigned): IPhone-App: negative value meter reading
- 01:48 pm Bug #1327 (Assigned): Wrong apartmentID selected
- 01:47 pm Feature #1233 (Closed): Add audio drivers and MP3 playback utility to image/RFS
- 01:46 pm Bug #1326 (Assigned): IPhone-App and dS-Taster : Apps are not able to discover dSS
- 01:44 pm dSS11 Web Setup Interface Bug #1325 (Assigned): Geräteverfügbarkeit / Ansicht aktualisieren
- the currently selected dSM must be selected after the refresh again.
- 01:43 pm Feature #774 (Assigned): Generate report for device presence check
- 01:40 pm Bug #1323 (Assigned): No error when refreshing package info if server is not available
- 01:38 pm Feature #1320 (Assigned): Provide button with link to product registration page
- 01:24 pm Bug #658 (Closed): Additional bus change callbacks of unchanged devices
- 01:23 pm Bug #1350 (Assigned): Additional bus change callbacks of unchanged devices
- Original report: #658
Still present with Release 1.3.0-test12. - 01:21 pm Feature #1066: mehrere Pfade in einem /json/property/query
- please close ticket
- 01:21 pm Bug #793 (Closed): dSM-API library callback with NULL argument
- 01:20 pm Tasks #1068 (Closed): extend soap api
- 01:20 pm Feature #371 (Closed): Support for both http and https
- 01:19 pm Feature #1118 (Closed): Update SpiderMonkey JavaScript engine to release 1.8.5
- 01:19 pm Feature #1138 (Closed): dSA should be able to purge old data and manage the size of the database
- 01:18 pm Feature #1206 (Closed): Update dSS methods and classes to work with SpiderMonkey 1.8.5
- 01:16 pm Bug #489 (Resolved): on / off switching for programming mode
- 01:16 pm Tasks #1193 (Closed): Implement configuration page in dss11-websetup
- 01:15 pm Bug #1349 (Resolved): Selection for all rooms is missing in timed-events and scene-responder app
- using the current version (SR 0.6.0.4, TE 1.0.0.4), the room selection 'all rooms' disappeared.
This selection must ... - 01:12 pm Bug #1348 (Assigned): Scene-responder event might result in an endless loop
- If a trigger event scene is called within the execution event of a scene responder, the trigger hits again and will r...
- 01:12 pm Feature #1264 (Closed): Deploy new OE in testing
- 01:12 pm Bug #740 (Closed): Error when updates include opkg conffiles
- thsi case would not throw an error, opkg was patched to get a more fine grained error indication
- 01:10 pm Bug #1247 (Closed): setSceneMode is missing flag "ignore local prio"
- 01:07 pm Feature #1210 (Closed): Replace metering backend with librrd
- MR applied (long ago)
- 01:06 pm Bug #1201 (Closed): json pushSensorValue: interchanged zone ID and sourceDSID
- 01:05 pm Bug #1130 (Closed): LastCalledScene gets no update when using ForceCallScene 0
- 01:02 pm Bug #1127 (Closed): JSON undoScene does not accept sceneNumber parameter
- 11:39 am Bug #1194 (Closed): Event-Mailer app does not delete events
- 11:39 am Bug #1196 (Closed): event-mailer: no mails are send for deep-off or stand-by activities
- 11:37 am Bug #1258 (Closed): opkg loses dependency packages during update
- 11:36 am Feature #1132 (Closed): Define and use rootfs image version
- 11:34 am Feature #963: Update OE and Linux kernel to latest version
- Only for new hardware!
- 11:32 am Bug #889 (Closed): Compilation fails with boost >= 1.46
- 11:32 am Feature #1207 (Closed): Update webservice api to work with gsoap 2.8.x
- 11:32 am Bug #482 (Closed): make sure opkg lets us know if an update succeeded or failed
- 11:29 am Feature #1215 (Resolved): Extend script API's to provide energy consumption in Ws
- MR applied
- 11:29 am Bug #1109 (Closed): ds485-> Indirekter Absturz
- 11:28 am Bug #1145 (Closed): Struktur der gespeicherten Properties im Sceneresponder
- 11:27 am Bug #1146 (Closed): Struktur der gespeicherten Properties im TimedEvent
- 11:22 am Feature #1213: Send mail notification if system or add-on updates are available
- it was decided to moving this post L&B
- 11:17 am Bug #1098 (Rejected): Wrong calcualtion of percentage during device presence test
- not reproducible after factory reset on my home dSM's
- 11:09 am Feature #993 (Closed): Metering App: display notification if flash player is not installed
- App was re-written without using flash.
- 10:54 am Bug #1143 (Assigned): Server set to Fix IP changes its IP address
- 10:49 am Feature #979 (Assigned): Configuration page for WLAN dongles
- 10:47 am Feature #1053 (Rejected): Add support for calling URL's from scene responder
- double entry; #1279 is planned already
- 10:39 am Feature #1347 (Assigned): Provide civil twilight data
- Currently, the sunset/-rise time is calculated and published to be used by dS-Apps.
We need to add the civil twiligh... - 10:10 am Feature #1311: Provide an API for high level states
- We must ensure the best-most reliability of the states. The states must be correct after the dSS restart or when the ...
01/21/2012
- 01:29 pm Bug #946 (Closed): Synchronize RTC
- 01:21 pm Bug #1346 (Assigned): dss11-ledd does not respond to event messages
- Sometimes the status of the led does not change back from system update to ready mode. Sending the ready signal again...
- 12:54 pm Bug #1345 (Resolved): "refresh view" results in tripple-refresh
- when refresh view buton in the dSS11 WebSetup UI is pressed, it internally results in a 3x-refresh
01/20/2012
- 05:26 pm Feature #1310 (Resolved): Extend GetReachableScenes to take group into account
- 05:25 pm Bug #824 (Resolved): Interne Scripte -> Fehlerhaftes Verhalten
- Implemented Zone.callScene. This should be the preferred method to be used by add-ons.
This does not solve the que... - 03:33 pm Tasks #1344 (Closed): UI
- 03:33 pm Tasks #1338 (Resolved): UI part
- 01:27 pm Tasks #1339 (Resolved): new api call for device presence check.
- 01:27 pm Tasks #1341 (Assigned): dsm regression test
- 01:27 pm Tasks #1340 (Assigned): provide functionality in dsm
- 11:51 am Bug #1343 (Resolved): backup restore throws an error because of ntpclient configuration
- Installing a "pre-ntpd" backup in a "post-ntpd" installation results in an error with the following log...
- 08:00 am Bug #1302: Scene Responder: application hangs while loading configuration website
- Problem is reproducible:
if scene-responder or timed-events switches a device that was removed and deleted from the...
01/19/2012
- 04:43 pm Bug #1342 (Assigned): Event-Mailer: event list does not have a scroll bar
- If the number of events exceeds the available size on the screen, there's no scroll bar shown to scroll down to the h...
- 10:58 am Tasks #1339 (Assigned): new api call for device presence check.
- 10:41 am Tasks #1341 (Closed): dsm regression test
- 10:40 am Tasks #1340 (Closed): provide functionality in dsm
- 10:39 am Tasks #1339 (Closed): new api call for device presence check.
- 10:37 am Tasks #1337 (Resolved): dsm part
- 10:35 am Feature #1278 (Resolved): improvements iPhone App
- Possible duplicate: #1282
- 10:31 am Bug #1282 (Resolved): Improve performance iPhone App
- 10:16 am Tasks #1338 (Assigned): UI part
- 10:15 am Tasks #1338 (Closed): UI part
01/18/2012
- 05:37 pm Bug #1333 (Closed): update sript does not work wit ubifs
- Available in dSS11-WebSetup 0.20.1
- 05:36 pm Bug #1333 (Resolved): update sript does not work wit ubifs
- 02:22 pm Bug #1336 (Resolved): iPhone app: Update hoptoad to latest version (now called Airbrake)
- 02:20 pm Bug #824: Interne Scripte -> Fehlerhaftes Verhalten
- Another side effect of the set optimizer: when optimizing a group-scene call to single device scene calls the dss not...
- 01:58 pm Tasks #1337 (Closed): dsm part
- 01:32 pm Bug #1333 (Assigned): update sript does not work wit ubifs
- MR submitted
- 11:39 am Feature #1322: UI modifications to support Jalousie devices (shade property dialog)
- Text for both calib steps can be copied from here:
Schritt 1
Die Jalousie fährt zunächst in die benötigte Position z... - 11:06 am Feature #1298 (Resolved): Adapt Update-test scripts
- 10:21 am Bug #1336 (Closed): iPhone app: Update hoptoad to latest version (now called Airbrake)
- 10:20 am Bug #1335 (Assigned): Update git repo of iPhone code
- The git repository needs to be updated with the latest iPhone code.
Also Mathias Deutz from G&S needs access for acc... - 10:20 am Bug #1317: Metering im internen Scripting
- Joh, geht :-)
- 10:18 am Bug #1334 (Assigned): iPhone App: Status bar wrongly changes to green
- If warm starting the application while connection to the last known dss is not available, the status bar wrongly chan...
- 08:12 am Feature #1332: Metering: change to new metering intervals
- I checked Jaimes's input to keep 1min-interval with Martin again. 1min does make sense to monitor the consumption of ...
- 07:42 am Feature #1330: Metering: provide interface to query defined time period
- no comment - was a wrong entry :)
01/17/2012
- 09:42 pm Bug #1047 (Resolved): Misuse of pool.ntp.org
- using ntpd instead of ntpclient now; pools entered in configuration
- 09:36 pm Bug #946: Synchronize RTC
- switched from ntpclient to ntpd on the rootfs (supported by dss11 websetup 0.20.0)
updated ntpd init script as dis... - 06:11 pm Bug #1333 (Closed): update sript does not work wit ubifs
- with ubifs the output of df has changed, this breaks the update script; effectively this means, that updates via the ...
- 03:33 pm Bug #1331 (Closed): Android concept app: scenes out of scroll view crashes app when called
- 02:41 pm Feature #1332 (Resolved): Metering: change to new metering intervals
- The following metering averaging intervals are required (via DUC):
* 1 second for the last 10 minutes
* 1 minute ... - 01:45 pm Bug #1331 (Closed): Android concept app: scenes out of scroll view crashes app when called
- 01:43 pm Bug #1326: IPhone-App and dS-Taster : Apps are not able to discover dSS
- A version of the developer feed also had this issue. It's because the dssweb zeroconf is not being broadcasted.
- 01:42 pm Bug #1328: IPhone-App: negative value meter reading
- This is indeed a 16bit error, and a fix has already been implemented in the current code and will be available in the...
- 11:44 am Feature #1330 (Resolved): Metering: provide interface to query defined time period
- Another method should provide the data for a predefined time range within the available data.
- 09:29 am Bug #1244 (Resolved): dSS hangs for a couple of minutes and resarts afterwards
- Durch den DOM Parser entsteht beim Lesen der apartment.xml und dem Aufbau des Datenmodells eine starke Fragmentierung...
- 09:11 am Bug #1269 (Closed): dSS links against deprecated dsm-api functions
- 07:39 am Bug #1329 (Rejected): metering-app aka Verbrauchsanzeige: zero-values disappear after reloading m...
- double entry #1299
- 07:36 am Bug #1329 (Rejected): metering-app aka Verbrauchsanzeige: zero-values disappear after reloading m...
- Sometimes single zero-values within the metering graph can be detected, especially when using a high refresh rate of ...
- 07:06 am Bug #1328 (Closed): IPhone-App: negative value meter reading
- In the meter-view (e.g. configuration -> "5. Meters" -> Wohnen_Essen_Kueche -> "Meter reading") of the iPhone-app a n...
01/16/2012
- 02:38 pm Feature #1279: Allow URL calls from server-Apps
- For http we could get it working with the current socket class but it's certainly not clean and not for https. For th...
- 01:50 pm Bug #1288 (Resolved): ds485d wechselt zu oft in state: isolated
- 01:39 pm Feature #1238 (Closed): Change parameter naming in 'edit device value' dialog
- 01:38 pm Feature #641 (Closed): Create a dSS11 image for x86 for use in a VM
- 01:38 pm Feature #1075 (Closed): Add configuration and handling for 1-/2-way push-button of mult-input dev...
- 01:37 pm Bug #1171 (Closed): WebUI: green color for selected row is too weak
- 01:36 pm Bug #1242 (Closed): Sunrise/set event are not executed
- 01:04 pm Feature #1257 (Closed): Modify column data for output and button modes
- 11:34 am Bug #1174 (Closed): WebUI: add two digits to paramters in shade property dialog
- 11:33 am Bug #1232 (Closed): Timed-Events: events are called twice
- 11:24 am Bug #1293 (Resolved): Webui: Change text for disabling programming mode
- MR applied
- 09:33 am Bug #1302: Scene Responder: application hangs while loading configuration website
- App property loading is deferred until the "custom scene name fetching" query returns. In this case, this doesn't hap...
- 09:28 am Bug #1327 (Resolved): Wrong apartmentID selected
- Initially an apartmentID is selected based on the dSS11 MAC address. If the number of dSMs is laster increased so tha...
- 09:21 am Bug #1288: ds485d wechselt zu oft in state: isolated
- A broken stunnel packet was identified as a major cause for such bus resets.
- 09:17 am Bug #1271 (Resolved): dSM LED goes black
- Solution in new dS485 stack version
- 09:04 am Bug #1326 (Resolved): IPhone-App and dS-Taster : Apps are not able to discover dSS
- Normally the apps are able to discover all dSSs within a network (*.local). With the current dSS version this seems t...
- 08:50 am Bug #1287 (Resolved): Scene-Responder script error when setting a single devices output value
- its fixed in 0.6.0.3 which just hasn't been packaged yet. Thanks for the reminder, I'll do that today.
- 08:29 am Bug #1236 (Closed): WebUI: edit device value dialog: format x.xx% is not always shown
- 08:29 am Feature #992 (Closed): Modify 'LED mode' setting for push-button devices
- 08:26 am Feature #1063 (Closed): Add column with 'ouput mode' to all tabs
01/15/2012
- 07:03 pm Bug #1321 (Resolved): Set system logger minimum severity level
- 05:55 pm Bug #1047: Misuse of pool.ntp.org
- Added ntp package and configured it to use the given pool servers. Ready to switch as soon as dSS11 WebSetup supports...
- 11:08 am Bug #1317 (Resolved): Metering im internen Scripting
01/14/2012
- 10:10 pm Bug #946: Synchronize RTC
- reconfigured udev to symlink rtc->rtc1 instead of rtc0. the new link will only be active after a reboot.
- 12:58 pm Bug #1309 (Resolved): metering-app: no scrollbar in meter list
- resolved in the next release (0.2.5)
01/13/2012
- 11:09 am dSS11 Web Setup Interface Bug #1325 (Assigned): Geräteverfügbarkeit / Ansicht aktualisieren
- Nach dem beim dSM die Geräteverfügbarkeit beendet ist, muss man die Ansicht immer manuell ausführen dies sollte autom...
01/12/2012
- 10:45 pm Bug #1267 (Resolved): List of activities is wrong when selecting pushbutton with scenes >10
- Merged.
- 08:20 pm Feature #986: WebUI: dSS Update must provide a button to display the release notes (current and p...
- Merged into mainline.
- 08:20 pm Feature #986 (Resolved): WebUI: dSS Update must provide a button to display the release notes (cu...
- 03:50 pm Feature #1277: Verify browser support
- Tester needs fully equipped system with all products connected.
- 03:41 pm Bug #1307: Pushbutton mode 'area taster' must disable local priority as a default for grey devices
- dSM:
- set initial area priority to false on grey devices (but not on jocker devices)
UI:
- disable area local p... - 03:05 pm Feature #1324 (Assigned): UI modifications to support Jalousie devices (edit device value dialog)
- 03:05 pm Feature #1322 (Assigned): UI modifications to support Jalousie devices (shade property dialog)
- 02:36 pm Feature #1324 (Resolved): UI modifications to support Jalousie devices (edit device value dialog)
- following changes are needed in edit device value dialog to support jalousie devices:
- change the format of the pos... - 02:12 pm Bug #1318 (Assigned): Internes Metering: EnergieWerte
- 02:12 pm Bug #1319 (Closed): Metering - energy values are broken
- 02:11 pm Bug #1318: Internes Metering: EnergieWerte
- new metering series based on energy counter (monotonous)
- 01:54 pm Bug #1301: review logrotate configuration
- decided in call: disable rrdcached logs completely, put add-on logs in own directory
- 01:38 pm Bug #1047: Misuse of pool.ntp.org
- Also remove "Server" field in UI
- 01:38 pm Bug #1047: Misuse of pool.ntp.org
- Your vendor pool zone "digitalstrom" has been setup. The
hostnames are below. They will be active within a few hou... - 01:32 pm Bug #1323 (Assigned): No error when refreshing package info if server is not available
- Seems that when the server is not available, the error "could not refresh package list" is not displayed.
I.e., lo... - 01:20 pm Feature #1322 (Resolved): UI modifications to support Jalousie devices (shade property dialog)
- In order to support jalousie devices, we need follwing changes within the shade property dialog:
- change text 'Fahr... - 10:45 am Bug #1321 (Assigned): Set system logger minimum severity level
- 10:25 am Feature #778 (Closed): implement class for ongoing traffic logging
- already for months in the dSA
- 10:22 am Bug #1321 (Resolved): Set system logger minimum severity level
- For develop and testing we should use default level lsDebug, for other feeds lsWarning.
The JavaScript interpreter w... - 09:29 am Bug #1317 (Assigned): Metering im internen Scripting
- 08:59 am Feature #1320 (Assigned): Provide button with link to product registration page
- The end customer will be able to register his product online.
Therefore, we need to provide a button (location tbd) ...
01/11/2012
- 10:43 pm Bug #1300 (Resolved): dSS login password cannot be changed
- Reconfigured busybox and enabled the getopt applet.
- 04:29 pm Feature #1297 (Resolved): Create new staging/fieldtest/production feeds
- Feeds deployed.
- 04:28 pm Bug #1267: List of activities is wrong when selecting pushbutton with scenes >10
- Merge request submitted.
- 03:46 pm Bug #1319 (Closed): Metering - energy values are broken
- The energy stored in the rrd-database are mean values (Wh/s) of the interval, but they should be absolute values (Wh)...
- 03:44 pm Bug #1318 (Resolved): Internes Metering: EnergieWerte
- Das interne Metering kann prinzipiell unterscheiden zwischen den "consumption", das ist der aktuelle verbrauch in W u...
- 03:38 pm Bug #1317 (Resolved): Metering im internen Scripting
- Die Auflösung der Meteringwerte wurde verfeinert, aber die Calls im Scripting geben immer noch integerwerte zurück, w...
- 03:02 pm Bug #1316 (Assigned): dS logo cropped
- In addition, the logo must be replaced and the link fixed.
- 03:01 pm Feature #1315 (Assigned): Rewrite the xml reader/writer to use expat and sax
- 02:56 pm Feature #1314 (Assigned): Event history of system level events
- open point: how can we link the event and metering data? Are the current metering data good enough?
- 02:51 pm Bug #1316 (Assigned): dS logo cropped
- current-devel
Win7, Firefox 9.0.1
The digitalSTROM logo in the top right corner is cropped at the bottom and ri... - 02:48 pm Feature #1313 (Assigned): Provide events for apartment buttons
- 02:46 pm Feature #1312 (Assigned): Provide events for the undo scene function
- 02:44 pm Feature #1311 (Assigned): Provide an API for high level states
- twilight needs to be added / define what is day/night
- 02:37 pm Feature #1310 (Assigned): Extend GetReachableScenes to take group into account
- must have for App rework
- 02:36 pm Bug #1309 (Assigned): metering-app: no scrollbar in meter list
- 02:35 pm Bug #1308 (Assigned): B35: Read time out
- currently, the only way is to wait for the timeout.
we'll check the possibility to introduce proper return codes. Ho... - 02:27 pm Bug #1307 (Assigned): Pushbutton mode 'area taster' must disable local priority as a default for ...
- 02:24 pm Feature #1306 (Assigned): Allow pre-installed Apps on the dSS
- 02:21 pm Bug #1305 (Assigned): presence-simulator: reconfiguration of activities are not possible
- 02:21 pm Bug #1304 (Assigned): presence-simulator: app naming not consistent or wrong
- 02:20 pm Bug #1303 (Assigned): mobile-remote-control: first start-up without showing energy bars
- Peter, could you please look into this issue? Thanks!
- 02:19 pm Bug #1302 (Assigned): Scene Responder: application hangs while loading configuration website
- 02:16 pm Bug #1301 (Assigned): review logrotate configuration
- 02:15 pm Bug #1300 (Assigned): dSS login password cannot be changed
- 02:14 pm Bug #1299 (Assigned): Metering sometimes returns 0 for the last second
- 02:10 pm Bug #1294 (Rejected): Add parameter to shade properties dialog
- 02:08 pm Bug #1292 (Assigned): App icons are misplaced and are moving around
- Miguel saw the same on Chrome
- 02:07 pm Bug #1291 (Assigned): List of available Apps must be refreshed after updating the apps
- happened on testing feed 1.3-test03
- 02:04 pm Bug #1290 (Assigned): do not use deprecated headers
- 02:03 pm Bug #1289 (Assigned): Android app: special characters in password/username can destroy http get
- 02:02 pm Bug #1287 (Assigned): Scene-Responder script error when setting a single devices output value
- Andreas, this is resolved, right?
- 01:59 pm Feature #1286 (Assigned): Create all simulated devices in the same js environment
- this will reduce memory consumption when having simulated devices
- 01:56 pm Bug #1283 (Assigned): unschöner Text
- 01:54 pm Bug #1282 (Assigned): Improve performance iPhone App
- 10:11 am Feature #1315 (Assigned): Rewrite the xml reader/writer to use expat and sax
- The current xml reader implementation is dom based and has strong disadvantages in memory resources. A sax parser is ...
- 10:02 am Feature #1314 (Assigned): Event history of system level events
- The dSS should store system events in a database and provide an API to query and manage the history of events.
Inc... - 09:55 am Feature #1313 (Assigned): Provide events for apartment buttons
- Devices with configurable button input mode may be set to Apartment Mode and create click type user events. These eve...
- 09:49 am Feature #1312 (Assigned): Provide events for the undo scene function
- Create model events for the undo function and post them as undoScene events to the internal event queue.
- 09:46 am Feature #1311 (Assigned): Provide an API for high level states
- The dSS has to manage a set of predefined high level states and make them available to JSON, SOAP and Scripting.
C... - 09:27 am Feature #1310 (Resolved): Extend GetReachableScenes to take group into account
- The JSON method GetReachableScenes should report all scenes in a a zone which may be called from a physical device. T...
- 09:21 am Bug #1270 (Resolved): apartment.xml is only written after a manual change in the configuration
01/10/2012
- 11:33 pm Feature #986: WebUI: dSS Update must provide a button to display the release notes (current and p...
- Merge request submitted.
- 06:17 pm Feature #1223 (Closed): Android app: Widget for activity calls
- 06:17 pm Feature #1229 (Closed): Mobile concept: Automatic leave home/come home
- 06:17 pm Feature #1228 (Closed): Mobile concept: Use voice control to activate scene calls
- 06:17 pm Feature #1202 (Closed): Change device firmware version format
- 04:18 pm Bug #1064 (Resolved): Updated Apps appears both in Update and Install page
- Merged.
- 04:16 pm Feature #1272 (Resolved): Rename scene names for shade-scenes
- Merged into mainline.
- 03:52 pm Feature #1250 (Closed): Merge mobile concepts into one application
- 03:52 pm Bug #1252 (Closed): dSM: room-off (1s hold) should be possible while moving from scene x to szene 0
- 02:30 pm Bug #1255 (Closed): S-R/T-E Apps: modification of the group is not shown when reopening the dialog
- 02:09 pm Bug #1309 (Resolved): metering-app: no scrollbar in meter list
- when the number of meters exceeds the space available in the list, further meters can not be selected because there i...
- 01:56 pm Bug #824: Interne Scripte -> Fehlerhaftes Verhalten
- A side note for when this gets fixed/closed:
TimedEvents and SceneResponder use the .byPresence(true) filter to avoid... - 10:37 am Feature #986 (Assigned): WebUI: dSS Update must provide a button to display the release notes (cu...
- 10:34 am Feature #986: WebUI: dSS Update must provide a button to display the release notes (current and p...
- I discussed the topic with marketing.
We'll place just one button which will open the locally installed release note...
01/09/2012
- 05:14 pm Bug #1308 (Assigned): B35: Read time out
- We get a: read timed out, after a SOAP call (deviceCallScene)
On the dss site we got following error-message:
> d... - 05:00 pm Bug #1295 (Resolved): Sceneprogramming and shade wizard must work when programming mode is disabled
- relevant commits ind dSM reverted
- 04:40 pm Bug #1271: dSM LED goes black
- A trial version of libdsm-api that should detect the assumed underlying condition, has been deployed to HPZ.
- 01:58 pm Feature #1281 (Assigned): Use dSApps from smartphones
- 01:53 pm Feature #1280 (Assigned): User defined events (highlevel events)
- 01:48 pm Feature #1279 (Assigned): Allow URL calls from server-Apps
- http and https required. Wildcards (parameters) are not required yet.
ticket must provide the basic functionality wi... - 01:42 pm Feature #1278 (Feedback): improvements iPhone App
- details need to be defined
- 01:40 pm Feature #1277 (Assigned): Verify browser support
- 01:39 pm Feature #1276 (Assigned): Leuchtmittel Wizard
- 01:38 pm Feature #1275 (Rejected): Konzept Rollladen, Markise, Jalousie
- will be tracked in L&B list
- 01:35 pm Feature #1273 (Assigned): Make multi-button configuration/handling transparent to add-on/wwebserv...
- 01:34 pm Bug #1271 (Assigned): dSM LED goes black
- workaround in dSA implemented for 1.3
- 01:27 pm Bug #1307 (Resolved): Pushbutton mode 'area taster' must disable local priority as a default for ...
- Grey devices must not set the local priority for device- and area buttons (default setting).
for device buttons, thi... - 11:58 am Bug #1260 (Closed): Edit device properties dialog in activities hangs when editing TKM's without ...
- 11:56 am Bug #1265 (Closed): Android app: prepare update with bugfixes for Android Market
- 11:53 am Bug #1135 (Rejected): SceneResponder calls wrong group number
- tried again in the office and at home - is not reproducible
- 11:10 am Bug #1300: dSS login password cannot be changed
- getopt seems to be missing...
- 11:08 am Feature #1306 (Assigned): Allow pre-installed Apps on the dSS
- Currently, the user has to install all required Apps on his own.
We must be able to define a list of server-Apps whi... - 09:15 am Bug #946: Synchronize RTC
- Due to a kernel bug in 2.6.32 the configuration of the external rtc will be corrupted when the time is updated.
01/08/2012
- 08:44 pm Feature #986 (Feedback): WebUI: dSS Update must provide a button to display the release notes (cu...
- I am not sure if we thought this through completely, the current ticket description is quite confusing, especially re...
01/07/2012
- 08:57 pm Bug #1305 (Assigned): presence-simulator: reconfiguration of activities are not possible
- Reconfiguration of a previously defined or changed set of activities is not possible. The configuration dialog shows ...
- 08:35 pm Bug #1304 (Assigned): presence-simulator: app naming not consistent or wrong
- presence-simulator vs. Anwesenheit+s+imulation vs. Anwesenheit+ss+imulation
!Screen_Shot_2012-01-07_at_20.31.10.png! - 01:13 pm Bug #1303: mobile-remote-control: first start-up without showing energy bars
- Maybe this is a side-effect of the broken energy storage and reporting feature on dSS HW-versions without SD-cards!
- 01:08 pm Bug #1303 (Assigned): mobile-remote-control: first start-up without showing energy bars
- While opening the mobile-remote app no energy consumption bars are visible, but the total consumption value is report...
- 12:49 pm Bug #1302 (Resolved): Scene Responder: application hangs while loading configuration website
- The scene responder configuration website stuck while showing the information box: loading...
Tested on a mac and wi...
Also available in: Atom