Bug #266

Webinterface displays false zone - circuit relation

Added by Michael Troß over 2 years ago. Updated 10 months ago.

Status:Closed Start date:01/07/2010
Priority:(P1) Urgent Due date:
Assignee:Michael Troß % Done:

0%
Category:-
Target version:0.7.7
Severity:Normal Target:
Story points-
Velocity based estimate-

Description

Initially the circuit-zone relation is correct. Buf after some uptime the circuit ID's of the zones are mangled and do not much the initial state anymore.

Related issues

related to Bug #254: Handling of dS485 bus reorganization Closed 12/18/2009

Associated revisions

Revision 9d431f0f
Added by Patrick Stählin over 2 years ago

Track the bus-id of the dSMeter on the device

If a meters bus-id changed due to a bus reorganization, the devices still
referenced the old bus id. Now we're remembering the meters DSID instead
of the volatile bus-id.

Fixes #266
References #254

History

#1
Updated by Michael Troß over 2 years ago

  • Target version set to 0.7.5

#2
Updated by Michael Troß over 2 years ago

  • Assignee set to Matias Fernandez

#3
Updated by Miguel Rodriguez over 2 years ago

  • Status changed from New to Assigned

#4
Updated by Miguel Rodriguez over 2 years ago

  • Priority changed from (P3) Normal to (P2) High

#5
Updated by Matthias Aebi over 2 years ago

  • Target version changed from 0.7.5 to 0.7.6

#6
Updated by Miguel Rodriguez over 2 years ago

  • Category deleted (Web interface)
  • Assignee changed from Matias Fernandez to Patrick Stählin
  • Priority changed from (P2) High to (P1) Urgent

#7
Updated by Michael Troß over 2 years ago

  • Target version changed from 0.7.6 to 0.7.7

#8
Updated by Patrick Stählin over 2 years ago

  • Assignee changed from Patrick Stählin to Matias Fernandez

#9
Updated by Michael Troß over 2 years ago

  • Assignee changed from Matias Fernandez to Patrick Stählin

Actually the ticket title should be replaced. Its not only installer webinterface that suffers from a bug, likewise all API commands referring to a single device fail (Device.turnOn, Device.turnOff, eg.) after a period of uptime.

Under suspect is still the communication problem reported in #254.

#10
Updated by Patrick Stählin over 2 years ago

  • Status changed from Assigned to Resolved

#11
Updated by Patrick Stählin over 2 years ago

  • Assignee changed from Patrick Stählin to Michael Troß

#12
Updated by Michael Troß about 2 years ago

  • Status changed from Resolved to Closed

Also available in: Atom PDF